Independent Research 1

How to hot wire a car 

Needs:

- Hammer

- Flat-head screwdriver

- Make sure the car is manual

- Insulated gloves

- Wire cutters and strippers

Step 1: Pound a Flat-head screwdriver into the ignition slot with a hammer and then twist it as if it were a key. 

Step 2: If that doesn't start the car, the battery is flat or the car needs more work to get it started. So unscrew the plastic cover around the steering column, and pull apart the cover to expose the ignition cylinder.

Step 3: Identify which wires do what.

Step 4: Cut and then strip the power wires from the column and twist them together to turn the ignition on.

Step 5: Then cut and strip the starter wires and tap them together until the engine starts, tape up the ends of the wires so you don't get shocked when driving.

Step 6: Use a Flat-head screwdriver to free the steering lock and any locking features stopping you from driving.

The reason of researching this is that at the start of our sequence we are going to have the girl trying to hot wire a car until she hears the biker coming.